Function and Arbitrary Generator Products from Aim-TTi : TG2511A, TG5011A, TG2512A, TG5012A

    Price/Availability - USA

Price/Availability -  Other Countries

More Products from Aim-TTi

  Internal and External Modulation types of AM, FM, PM, PWM and FSK are included
 
 
 
 
 
 

Digital Modulation, Internal and External

Both generators offer a comprehensive set of digitally based modulations.

The internal modulation source can use any of the standard or arbitrary waveforms within the generator (including noise) thus removing the need for an external modulation source. A modulating frequency between 1uHz and 1MHz can be specified.

An external modulation input enables any external waveform source to be used when required. The bandwidth is DC to 20kHz.

AM, FM and PM

Sine, square, ramp or arbitrary waveforms can be modulated using amplitude, frequency or phase modulation.

Amplitude depth is variable from 0.0% to 120.0%, frequency deviation from zero to Fmax/2, and phase deviation from -360.0 to +360.0 degrees.

PWM

Pulse width modulation is available for the pulse function using any standard or arbitrary waveform including noise.

Pulse width deviation is variable between 0% and 100%.

FSK

Frequency shift keying between any two frequencies is available for sine, square, ramp or arbitrary waveforms using the internal trigger generator or an external trigger signal.

The internal trigger generator is variable between 2mHz and 1MHz with 9 digit resolution.

BPSK

Binary phase shift keying is available for sine, square, ramp or arbitrary waveforms using the internal trigger generator or an external trigger signal.

 

modulator and modulated waveforms are
shown simultaneously

 

 

 

Sweep, Burst and Gated modes of operation are also available.

More Details

 

  Back to the Main Page           Next Feature        Additional 2-channel Features

Aim-TTi USA
71 Perinton Parkway, Fairport, NY 14450    USA
Tel: (585) 385-1750  Fax: (585) 385-1768   Web: www.aimtti.us  Email: info@aimtti.us